Live Edge Walnute Side Table

July 12, 2017Posted in TablesWritten by twillis79Leave a comment

This piece was constructed from a small collection of walnut pieces that my father acquired. The challenge to creating this piece was making something out of the limited amount of wood. There was a slight void in the top, so epoxy was used to fill in the gap and provide a smooth surface. Normally I leave epoxy unsanded, with a light sanding, a matte finished was achieved that matched the wax finish nicely. So, we have a narrow but chunky table that will make a great drink table.

Live Edge Mesquite Slab Table with Steel Legs

July 12, 2017Posted in TablesWritten by twillis79Leave a comment

Heavy live edge mesquite slab with natural voids filled with clear epoxy. The square steel legs on this table are not permanently mounted, so they could be swapped for a different style if a client desired. There is a heavy top coat of epoxy in this piece so it’s extra durable.

Cedar Strip Triangle Table

July 11, 2017Posted in TablesWritten by twillis79Leave a comment

Product Description
Designed to fit into tight corners while maintaining surface area, this triangle table has a light footprint that draws attention.
This particular table is constructed of narrow cedar strips, arranged for a contrast in the wood’s grain. It would be possible to
make a more subtle top out of less contrasting wood.

Steel Framed Cube Table

July 11, 2017Posted in TablesWritten by twillis79Leave a comment

This table was one of the first design ideas I wanted to create, because it established the connection of wood and steel – the basis of my creation process. Admittedly, the design process wasn’t perfect – there were many hurdles I had to overcome in order to create such a basic piece of furniture. At this point in the game, I didn’t have a table saw, and my experience welding was rudimentary at best, so I knew things might not work out so great. But, you don’t improve if you don’t try, so again we were off to the races.

Mid Century Night Stand

July 11, 2017Posted in TablesWritten by twillis79Leave a comment

Paul McCobb is one of my favorite designers. He made practical but beautifully simple pieces that were available to the masses. Today, it’s a bit more difficult to get his pieces, so I decided to make a prototype of a mid century nightstand that would be a nod to his creation, with some slight variations.

Cedar Round Epoxy Table

July 11, 2017Posted in TablesWritten by twillis79Leave a comment

This project involved a large cedar round that was actually multiple trees that grew closely together. Colored epoxy was used to help bind the separations into a single form. A geometric welded steel base completes the look – it’s simple lightweight structure supports the heavy top while keeping the eye drawn upwards towards the deep lustre of the wooden piece.

Gaming Console Towers

July 11, 2017Posted in ShelvingWritten by twillis79Leave a comment

If you’re interested in gaming, then you probably have multiple systems and that becomes a storage problem. It would be cool to play them all when you want to, but how do you store them properly? This project addressed that with a pair of steel tower shelves that were measured out to house multiple consoles, games, and controllers.

Drum Storage Shelf

July 11, 2017Posted in ShelvingWritten by twillis79Leave a comment

As a drummer, it’s easy to collect a lot of gear, and storing it can be somewhat of a problem. So, the solution was to build a shelving system that could handle different sizes of drums, various cymbals, and hardware. My particular set of drums are made of popular, which is a lightweight wood. This allowed me to construct the shelving with half inch steel, and made the shelving unit easy to move if needed. For heavier weight, something like this could be made with 1″ steel tube and reinforcement under the shelves – adding more rigidity and the ability to carry much heavier loads. In fact, you can see an example of this on my closet shelf <photos coming soon>– another project where I needed to store things.

Action Figure Shelf

July 11, 2017Posted in ShelvingWritten by twillis79Leave a comment

There are many things from our childhood that we hold on to as we age, mainly because it captivated us the moment we saw them. Our friends have a collection of antique Star Wars figures that they wanted to showcase in their home, to help preserve that feeling and hopefully pass it along to the next generation.

Slab Mesquite Table with Steel Legs

July 10, 2017Posted in TablesWritten by twillis79Leave a comment

Product Description
This table would fit in a variety of settings due to the warmth of the wood and edgy geometry of the steel legs. Beautiful mesquite live edge top has been sanded to show the enhanced grain and finished with tung oil. A circular knot hole is present through the piece and adds a nice touch of character. Due to it’s shape, it would fit nicely in a wedged corner just as well as a full side table in any setting.

hand made